Converting vinyl records to CD is easy, provided you know some basics, like registering ago. Here's what you need to convert your recordings to CD: -
1 A computer running Windows 2000, XP or Vista.
2 Line Card audio jack.
3 A turntable to play records.
4 If the amp is not built on a turntable pre-amplifier. Please note that you record from tape, then you do not need an amplifier. The amplifier is only required if youare always the recordings at low volume. Normally, the output of the turntable is not good and in some cases you may need a preamp. There is always a good idea to do a test recording and check the results. If you find that the recording quality is not what you want, you certainly need to strengthen a pre-amplifier to the output of the turntable.
5 For some turntables and a PC cable (you probably need a stereo RCA cable) Connect.
6 A CD or DVD driveThe computer.
7 A software to make recordings and burn CDs.
The most important thing in this whole process makes the connections. One thing is definite, you must connect the output jacks on the turntable line jack of the audio on your computer. Now you need, what kind of cable you would need to be determined. There are two types of sockets in the turntable and the computer's sound card:
1 RCA - If you see a pair of red and black jack. These RCA jacks.
Stereo 2 -If you see a single move is that stereo jack.
Now please look at the output jacks of the turntable. If you have RCA jacks and the computer's sound card has a stereo jack, then you need a stereo RCA cable. The concept is very simple, but you have to understand it. If your computer has a hub, and RCA connectors then you need an RCA to RCA plug.
After getting the right cables, you must connect to one side of the cable RCA jacks on the turntable and the other sideLine jack on your sound card. Normally, the color of the jack line, which should be blue to help in identifying the right Jack. Do not worry, even if you make the wrong connections, causes no damage to equipment. At most, it will not be able to take the shot.
After checking all connections, please use a recording software for the output of the turntable, which comes on the line to take in Jack. After recording you can burn CDs. Here are some tips for you:
1Never buy a pre-amplifier before you really need for sure.
2 If you want high quality recordings, not always used instead of line-in jack for microphone.
3 of research before buying an LP to CD converter. Make sure the software supports all functions, and there is no need to buy plug-in, to make things work.
These are the basic things you should know before starting to record your LPs, CDs. If you make the right contacts, you are just a few minutes to make yourrecoding the first!
0 comments:
Post a Comment